Modular single-roller tool system – test device
Modular single-roller tool system – test device
Basic element modular single-roller tool system
The basic element is available in three sizes. The machining direction (internal/external) and the tool preload is set by an adjusting knob.
Properties
The basic element is available in three sizes. The machining direction (internal/external) and the tool preload is set by an adjusting knob.
Advantages
- easy to use
- adjustable tool preload
- rugged tool design
Test Device
Properties
The test device is used to set and to check the required tool preload characteristics. With the dial gauge and the load cell it is then possible to correlate the tool preclamp with the rolling force to support constant process parameters.
Advantages
- easy to use
- including certified hydraulic load cell
- useable for diverse tool types
- rugged design
Tool assembly and handling
Classification force – spring deflection
Modular single-roller tool system
Classification Force – Spring Deflection:
Unlock the Fixing screw (3), turn the spindle with spring package according to the scale. Relock the Fixing screw nut (3). Check the preload setting with the test device.
Turn ClockWise = preload increases
Turn counterclockwise = preload decreases
Adjusting the center height:
Loosen the clamping of the tool fixture. The center height is adjusted by the adjusting screw (5). The setting should be between 0 and 2 mm above the machining center line. Fix the clamping of the tool fixture.